Booth Beacon
Put Your Sign Where Aisle Traffic Can See It
The TentGrip Booth Beacon holds a sign or flag pole at a 45° angle from your pop-up canopy, projecting your display outward so customers can spot it farther down the aisle.
It clamps directly to the canopy leg without drilling, tape, zip ties, or permanent modifications.
The TentGrip Universal Fit System fits square, round, hexagonal, octagonal, and other canopy legs measuring 1 inch to 1-7/16 inches (25–37 mm). Magnetic 3 mm, 5 mm, and 7 mm fit shims are included.
Mount only: Sign panel, sign or flag pole, clips, hanging hardware, and canopy are not included.
Fit & Compatibility
Fits canopy legs measuring 1 inch to 1-7/16 inches (25–37 mm) across their widest outside point.
Compatible with square, round, hexagonal, octagonal, and other leg shapes within the supported size range.
Each Booth Beacon can be installed without a shim or with the included 3 mm, 5 mm, or 7 mm magnetic fit shim. Use the combination that produces a secure fit without forcing or overtightening the mount.
What’s Included
Each Booth Beacon includes:
- 1 TentGrip Booth Beacon 45° angled mount
- 1 × 3 mm magnetic fit shim
- 1 × 5 mm magnetic fit shim
- 1 × 7 mm magnetic fit shim
Not included: Sign panel, sign or flag pole, clips, hanging hardware, and canopy.
Sign Pole Options
Choose the version that matches the outside diameter of the sign or flag pole you plan to use:
- 1 inch
- 3/4 inch
Measure the outside diameter of your pole before ordering.
Why 45°?
The Booth Beacon angles your display outward from the canopy instead of keeping it directly over the booth.
This helps make your business name, logo, flag, or directional sign easier to see for customers approaching from farther down a craft-show or vendor-event aisle.
Installation & Safety
- Measure your canopy leg across its widest outside point.
- Test the Booth Beacon without a shim, then add the appropriate magnetic fit shim if needed.
- Tighten the mount securely without overtightening.
- Install your sign or flag pole and display hardware securely.
- Check the entire setup periodically during use.
Remove signs, flags, and attached accessories during severe weather or whenever the canopy manufacturer recommends doing so. The Booth Beacon is not intended to anchor or reinforce the canopy.
Custom Sizes
Have a canopy leg outside the standard 25–37 mm fit range or a special sign-pole requirement? Contact Focused3D with a photo, the outside measurement and shape of the canopy leg, and the pole diameter. Custom sizes may be available.
