Booth Post
Add a Dedicated Mounting Post to Your Canopy
The TentGrip Booth Post gives you a convenient side-mounted post anywhere along your canopy leg, creating a clean mounting point for compatible clamps, brackets, signs, lighting, display hardware, and custom booth accessories.
Instead of clamping directly to the canopy frame or improvising with tape and zip ties, the Booth Post gives you a reusable mounting surface positioned beside the canopy leg so you can build out your display the way you need it.
The TentGrip Universal Fit System works with square, round, hexagonal, octagonal, and other canopy legs measuring 1 inch to 1-7/16 inches (25–37 mm). Magnetic 3 mm, 5 mm, and 7 mm fit shims are included.
Mount only: Clamps, brackets, poles, signs, lights, display hardware, canopy, and other accessories are not included.
Fit & Compatibility
Fits canopy legs measuring 1 inch to 1-7/16 inches (25–37 mm) across their widest outside point.
Compatible with square, round, hexagonal, octagonal, and other leg shapes within the supported size range.
Each Booth Post can be installed without a shim or with the included 3 mm, 5 mm, or 7 mm magnetic fit shim. Use the combination that produces a secure fit without forcing or overtightening the mount.
What’s Included
Each individual Booth Post includes:
- 1 TentGrip Booth Post
- 1 × 3 mm magnetic fit shim
- 1 × 5 mm magnetic fit shim
- 1 × 7 mm magnetic fit shim
The selected pack configuration determines how many complete Booth Posts and shim sets you receive.
Not included: Clamps, brackets, rods, poles, signs, lighting, display hardware, canopy, and other accessories.
What It Does
The Booth Post creates a dedicated side-mounted attachment surface next to your canopy leg. It can be used with compatible clamps, brackets, accessory holders, sign hardware, lighting mounts, display components, and other custom booth equipment.
It is especially useful when you want an accessory mounting point that is separate from the canopy leg itself and can be repositioned as your booth setup changes.
Choose Your Configuration
Single Mount: One Booth Post and one complete shim set.
Pair: Two Booth Posts and two complete shim sets.
Set of 4: Four Booth Posts and four complete shim sets.
The separate quantity box controls how many complete selected configurations are added to the cart.
Installation & Safety
- Measure your canopy leg across its widest outside point.
- Test the Booth Post without a shim, then add the appropriate magnetic fit shim if needed.
- Tighten the mount securely without overtightening.
- Attach compatible accessories to the post according to their manufacturer’s instructions.
- Check the mount and attached accessories periodically during use.
Accessory mount only: The Booth Post is not intended to anchor, reinforce, or stabilize the canopy, support a person, provide fall protection, or serve as structural or safety equipment.
Remove attached accessories during severe weather or whenever the canopy manufacturer recommends doing so.
Custom Sizes
Have a canopy leg outside the standard 25–37 mm fit range or a special mounting requirement? Contact Focused3D with a photo, the outside measurement and shape of the canopy leg, and information about the accessory you want to mount. Custom sizes may be available.
